Nece mi se dizat ograde

Započeo [LB]Weite.psd, Jul 04, 2010, 14:27:42 POSLE PODNE

prethodna tema - sledeća tema

0 članova i 8 gostiju pregledaju ovu temu.

Štampaj
Idi dole Stranice1 2
Korisničke akcije

[LB]Weite.psd

*

Jul 04, 2010, 14:27:42 POSLE PODNE
Evo radio sam po tutu i prvi put mi je uspilo :D no sad sam iso raditi malo veci race i evo napravi sve ljepo se compila no kad odem ingame nedizu mi se niti se nespustaju ograde -.-'' evo sta sam sve stavio za taj race

Kod (c) [Izaberi]
new DriftOgradaGore1;
new DriftOgradaGore2;
new DriftOgradaGore3;
new DriftOgradaDole1;
new DriftOgradaDole2;
new DriftOgradaDole3;
new DriftBaseUp1;
new DriftBaseUp2;
new DriftBaseUp3;
new DriftBaseUp4;
new DriftBaseUp5;
new DriftBaseUp6;
new DriftBaseUp7;
new DriftBaseUp8;
new DriftBaseUp9;
new DriftBaseUp10;
new DriftBaseUp11;
new DriftBaseUp12;
new DriftBaseUp13;
new DriftBaseUp14;
new DriftBaseDown1;
new DriftBaseDown2;
new DriftBaseDown3;
new DriftBaseDown4;
new DriftBaseDown5;
new DriftBaseDown6;
new DriftBaseDown7;
new DriftBaseDown8;
new DriftBaseDown9;
new DriftBaseDown10;
new DriftBaseDown11;
new DriftBaseDown12;
new DriftBaseDown13;
new DriftBaseDown14;


Ispod OnGameModeInit()

Kod (C) [Izaberi]
DriftOgradaGore1 = CreateObject(984, 1332.7237548828, -1400.4655761719, 11.017516136169, 0, 0, 0);
DriftOgradaGore2 = CreateObject(984, 329.22326660156, -1632.7742919922, 30.263298034668, 0, 0, 84);
DriftOgradaGore3 = CreateObject(984, -2428.0988769531, -601.80773925781, 132.19486999512, 0, 0, 306);
DriftOgradaDole1 = CreateObject(984, 1332.7237548828, -1400.4655761719, 11.017516136169, 0, 0, 0);
DriftOgradaDole2 = CreateObject(984, 329.22326660156, -1632.7742919922, 30.263298034668, 0, 0, 84);
DriftOgradaDole3 = CreateObject(984, -2428.0988769531, -601.80773925781, 132.19486999512, 0, 0, 306);
DriftBaseUp1 = CreateObject(984, 1332.7237548828, -1400.4655761719, 11.017516136169, 0, 0, 0);
DriftBaseUp2 = CreateObject(984, 329.22326660156, -1632.7742919922, 30.263298034668, 0, 0, 84);
DriftBaseUp3 = CreateObject(983, -2780.0437011719, -484.42724609375, 6.9515295028687, 0, 0, 50);
DriftBaseUp4 = CreateObject(983, -2790.4599609375, -476.39254760742, 6.871054649353, 0, 0, 56);
DriftBaseUp6 = CreateObject(983, -2795.0417480469, -473.04010009766, 6.871054649353, 0, 0, 52);
DriftBaseUp7 = CreateObject(983, -2788.6228027344, -496.20874023438, 6.8736667633057, 0, 0, 50);
DriftBaseUp8 = CreateObject(983, -2793.4953613281, -492.32580566406, 6.8715238571167, 0, 0, 54);
DriftBaseUp9 = CreateObject(983, -2798.8049316406, -488.67864990234, 6.871054649353, 0, 0, 56);
DriftBaseUp10 = CreateObject(983, -2804.0227050781, -485.09436035156, 6.871054649353, 0, 0, 54);
DriftBaseUp11 = CreateObject(983, -2809.1264648438, -325.58218383789, 6.714804649353, 0, 0, 78);
DriftBaseUp12 = CreateObject(983, -2815.4350585938, -324.06164550781, 6.7225999832153, 0, 0, 74);
DriftBaseUp13 = CreateObject(983, -2778.3413085938, -328.12686157227, 6.722617149353, 0, 0, 0);
DriftBaseUp14 = CreateObject(983, -2778.353515625, -330.83609008789, 6.722617149353, 0, 0, 0);
DriftBaseDown1 = CreateObject(984, 1332.7237548828, -1400.4655761719, 11.017516136169, 0, 0, 0);
DriftBaseDown2 = CreateObject(984, 329.22326660156, -1632.7742919922, 30.263298034668, 0, 0, 84);
DriftBaseDown3 = CreateObject(983, -2780.0437011719, -484.42724609375, 6.9515295028687, 0, 0, 50);
DriftBaseDown4 = CreateObject(983, -2785.1264648438, -480.34201049805, 5.121054649353, 0, 0, 52);
DriftBaseDown5 = CreateObject(983, -2790.4599609375, -476.39254760742, 4.871054649353, 0, 0, 56);
DriftBaseDown6 = CreateObject(983, -2795.0417480469, -473.04010009766, 4.871054649353, 0, 0, 52);
DriftBaseDown7 = CreateObject(983, -2788.6228027344, -496.20874023438, 4.6236667633057, 0, 0, 50);
DriftBaseDown8 = CreateObject(983, -2793.4953613281, -492.32580566406, 4.8715238571167, 0, 0, 54);
DriftBaseDown9 = CreateObject(983, -2798.8049316406, -488.67864990234, 4.871054649353, 0, 0, 56);
DriftBaseDown10 = CreateObject(983, -2804.0227050781, -485.09436035156, 5.121054649353, 0, 0, 54);
DriftBaseDown11 = CreateObject(983, -2809.1264648438, -325.58218383789, 4.714804649353, 0, 0, 78);
DriftBaseDown12 = CreateObject(983, -2815.4350585938, -324.06164550781, 4.9725999832153, 0, 0, 74);
DriftBaseDown13 = CreateObject(983, -2778.3413085938, -328.12686157227, 4.722617149353, 0, 0, 0);
DriftBaseDown14 = CreateObject(983, -2778.353515625, -330.83609008789, 4.722617149353, 0, 0, 0);

I na OnPlayerCommandeText

Kod (c) [Izaberi]
if (strcmp("/driftbaseup", cmdtext, true, 4) == 0)
{
if (PlayerInfo[playerid][pAdmin] >= 1)
{
   MoveObject(DriftBaseUp1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0);
   MoveObject(DriftBaseUp2, 329.22326660156, -1632.7742919922, 30.263298034668, 0);
   MoveObject(DriftBaseUp3, -2780.0437011719, -484.42724609375, 6.9515295028687, 0);
   MoveObject(DriftBaseUp4, -2785.1264648438, -480.34201049805, 6.871054649353, 0);
   MoveObject(DriftBaseUp5, -2790.4599609375, -476.39254760742, 6.871054649353, 0);
   MoveObject(DriftBaseUp6, -2795.0417480469, -473.04010009766, 6.871054649353, 0);
   MoveObject(DriftBaseUp7, -2788.6228027344, -496.20874023438, 6.8736667633057, 0);
   MoveObject(DriftBaseUp8, -2793.4953613281, -492.32580566406, 6.8715238571167, 0);
   MoveObject(DriftBaseUp9, -2798.8049316406, -488.67864990234, 6.871054649353, 0);
   MoveObject(DriftBaseUp10, -2804.0227050781, -485.09436035156, 6.871054649353, 0);
   MoveObject(DriftBaseUp11, -2809.1264648438, -325.58218383789, 6.714804649353, 0);
   MoveObject(DriftBaseUp12, -2815.4350585938, -324.06164550781, 6.7225999832153, 0),
           MoveObject(DriftBaseUp13, -2778.3413085938, -328.12686157227, 6.722617149353, 0);
           MoveObject(DriftBaseUp14, -2778.353515625, -330.83609008789, 6.722617149353, 0);
}
else
{
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
}
return 1;
}
if (strcmp("/driftbasedown", cmdtext, true, 4) == 0)
{
if (PlayerInfo[playerid][pAdmin] >= 1)
{
   MoveObject(DriftBaseDown1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0);
   MoveObject(DriftBaseDown2, 329.22326660156, -1632.7742919922, 30.263298034668, 0);
   MoveObject(DriftBaseDown3, -2780.0437011719, -484.42724609375, 6.9515295028687, 0);
   MoveObject(DriftBaseDown4, -2785.1264648438, -480.34201049805, 5.121054649353, 0);
   MoveObject(DriftBaseDown5, -2785.1264648438, -480.34201049805, 5.121054649353, 0);
   MoveObject(DriftBaseDown6, -2795.0417480469, -473.04010009766, 4.871054649353, 0);
   MoveObject(DriftBaseDown7, -2795.0417480469, -473.04010009766, 4.871054649353, 0);
   MoveObject(DriftBaseDown8, -2795.0417480469, -473.04010009766, 4.871054649353, 0);
   MoveObject(DriftBaseDown9, -2798.8049316406, -488.67864990234, 4.871054649353, 0);
   MoveObject(DriftBaseDown10, -2804.0227050781, -485.09436035156, 5.121054649353, 0);
   MoveObject(DriftBaseDown11, -2809.1264648438, -325.58218383789, 4.714804649353, 0);
   MoveObject(DriftBaseDown12, -2815.4350585938, -324.06164550781, 4.9725999832153, 0),
           MoveObject(DriftBaseDown13, -2778.3413085938, -328.12686157227, 4.722617149353, 0);
           MoveObject(DriftBaseDown14, -2778.353515625, -330.83609008789, 4.722617149353, 0);
}
else
{
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
}
return 1;
}
if (strcmp("/driftgateup", cmdtext, true, 4) == 0)
{
if (PlayerInfo[playerid][pAdmin] >= 1)
{
   MoveObject(DriftOgradaGore1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0);
   MoveObject(DriftOgradaGore2, 329.22326660156, -1632.7742919922, 30.263298034668, 0);
   MoveObject(DriftOgradaGore3, -2428.0988769531, -601.80773925781, 132.19486999512, 0);
}
else
{
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
}
return 1;
}
if (strcmp("/driftgatedown", cmdtext, true, 4) == 0)
{
if (PlayerInfo[playerid][pAdmin] >= 1)
{
   MoveObject(DriftOgradaDole1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0);
   MoveObject(DriftOgradaDole2, 329.22326660156, -1632.7742919922, 30.263298034668, 0);
   MoveObject(DriftOgradaDole3, -2428.0988769531, -601.80773925781, 132.19486999512, 0);
}
else
{
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
}
return 1;
}

i nekuzim odem ingame i dodem doogradice i nece se dignut niti spustit -.-'' pomoc molim vas

LuKsA

*

#1
Jul 04, 2010, 14:29:22 POSLE PODNE
Pa ti prakticki pod komandama /driftbaseup i down opce ni ne mjenjas kordinate kolko ja vidim, pa moras promjenit kordinate ako zelis da se nes desi...
Aequam memento rebus in arduis servare mentem.

[LB]Weite.psd

*

#2
Jul 04, 2010, 14:30:26 POSLE PODNE
promjenio sam, u mta sam napravio i gore i dole ograde i sejvo, converto no i meni se cini da izgledaju isto  ali nisu

LuKsA

*

#3
Jul 04, 2010, 14:33:41 POSLE PODNE
Pa nemozes tako lol, sad sam vidio tek, nemozes prvo na gore movat object DriftBaseUp1, a za dole movat DriftBaseDown1, moras nes ovako..

Kod [Izaberi]

   if (strcmp("/driftbaseup", cmdtext, true, 4) == 0) 
   { 
      if (PlayerInfo[playerid][pAdmin] >= 1) 
      { 
         MoveObject(DriftBaseUp1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0); 
      }
   }

Kod [Izaberi]

   if (strcmp("/driftbaseup", cmdtext, true, 4) == 0) 
   { 
      if (PlayerInfo[playerid][pAdmin] >= 1) 
      { 
         MoveObject(DriftBaseUp1, 1332.7237548828, -1400.4655761719, 15.017516136169, 0); 
      }
   }

Kuzis sad? :S
Aequam memento rebus in arduis servare mentem.

[LB]Weite.psd

*

#4
Jul 04, 2010, 14:36:44 POSLE PODNE
cek znaci prva komanda mora biti /driftbaseup pa onda ispod nje /driftbasedown ?????????

nastoe

#5
Jul 04, 2010, 14:44:43 POSLE PODNE
Citat: LuKsA poslato Jul 04, 2010, 14:33:41 POSLE PODNE
Pa nemozes tako lol, sad sam vidio tek, nemozes prvo na gore movat object DriftBaseUp1, a za dole movat DriftBaseDown1, moras nes ovako..

Kod [Izaberi]

   if (strcmp("/driftbaseup", cmdtext, true, 4) == 0) 
   { 
      if (PlayerInfo[playerid][pAdmin] >= 1) 
      { 
         MoveObject(DriftBaseUp1, 1332.7237548828, -1400.4655761719, 11.017516136169, 0); 
      }
   }

Kod [Izaberi]

   if (strcmp("/driftbaseup", cmdtext, true, 4) == 0) 
   { 
      if (PlayerInfo[playerid][pAdmin] >= 1) 
      { 
         MoveObject(DriftBaseUp1, 1332.7237548828, -1400.4655761719, 15.017516136169, 0); 
      }
   }

Kuzis sad? :S
Napravio si brzinu move objecta na >0< tako se nece pomaknuti

LuKsA

*

#6
Jul 04, 2010, 15:12:18 POSLE PODNE
A ok i brzina kretanja, ali nije u tome, on je prvo htio pomaknut objekt DriftBaseUp1 da kad gore podigne event il sta je vec, pa onda kad oce dole je htio pomaknut DriftBaseDown1
Aequam memento rebus in arduis servare mentem.

[LB]Weite.psd

*

#7
Jul 04, 2010, 15:41:27 POSLE PODNE
Kod (c) [Izaberi]
new DriftBaseUp1;
new DriftBaseDown1;
new DriftBaseUp2;
new DriftBaseDown2;
new DriftBaseUp3;
new DriftBaseDown3;
new DriftBaseUp4;
new DriftBaseDown4;
new DriftBaseUp5;
new DriftBaseDown5;
new DriftBaseUp6;
new DriftBaseDown6;
new DriftBaseUp7;
new DriftBaseDown7;
new DriftBaseUp8;
new DriftBaseDown8;
new DriftBaseUp9;
new DriftBaseDown9;
new DriftBaseUp10;
new DriftBaseDown10;
new DriftBaseUp11;
new DriftBaseDown11;
new DriftBaseUp12;
new DriftBaseDown12;
new DriftBaseUp13;
new DriftBaseDown13;
new DriftBaseUp14;
new DriftBaseDown14;

tak?

LuKsA

*

#8
Jul 04, 2010, 16:09:39 POSLE PODNE
Ne kuzis, daj mi sve objekte koje si napravio + komande koje zelis + kako zelis da se objekti pomicu, i ja ti slozim :S
Aequam memento rebus in arduis servare mentem.

[LB]Weite.psd

*

#9
Jul 04, 2010, 16:11:16 POSLE PODNE
pa sve ti je u prvom postu xD ali nezelim da midrugi slazu ocu se sam naucit

LuKsA

*

#10
Jul 04, 2010, 16:18:06 POSLE PODNE
Kad ti ja napravim, skuzit ces sta gdje ide..

Kod (c) [Izaberi]
new driftbase1, driftbase2, driftbase3, driftbase4, driftbase5, driftbase6, driftbase7, driftbase8, driftbase9, driftbase10, driftbase11, driftbase12, driftbase13;

Kod (c) [Izaberi]
driftbase1= CreateObject(984, 1332.7237548828, -1400.4655761719, 11.017516136169, 0, 0, 0);
driftbase2= CreateObject(984, 329.22326660156, -1632.7742919922, 30.263298034668, 0, 0, 84);
driftbase3= CreateObject(983, -2780.0437011719, -484.42724609375, 6.9515295028687, 0, 0, 50);
driftbase4= CreateObject(983, -2790.4599609375, -476.39254760742, 6.871054649353, 0, 0, 56);
driftbase5= CreateObject(983, -2795.0417480469, -473.04010009766, 6.871054649353, 0, 0, 52);
driftbase6= CreateObject(983, -2788.6228027344, -496.20874023438, 6.8736667633057, 0, 0, 50);
driftbase7= CreateObject(983, -2793.4953613281, -492.32580566406, 6.8715238571167, 0, 0, 54);
driftbase8= CreateObject(983, -2798.8049316406, -488.67864990234, 6.871054649353, 0, 0, 56);
driftbase9= CreateObject(983, -2804.0227050781, -485.09436035156, 6.871054649353, 0, 0, 54);
driftbase10= CreateObject(983, -2809.1264648438, -325.58218383789, 6.714804649353, 0, 0, 78);
driftbase11= CreateObject(983, -2815.4350585938, -324.06164550781, 6.7225999832153, 0, 0, 74);
driftbase12= CreateObject(983, -2778.3413085938, -328.12686157227, 6.722617149353, 0, 0, 0);
driftbase13= CreateObject(983, -2778.353515625, -330.83609008789, 6.722617149353, 0, 0, 0);

Kod (c) [Izaberi]
if (strcmp("/driftbaseup", cmdtext, true, 4) == 0)
   {
      if (PlayerInfo[playerid][pAdmin] >= 1)
      {
         MoveObject(driftbase1, 1332.7237548828, -1400.4655761719, 11.017516136169, 2);
         MoveObject(driftbase2, 329.22326660156, -1632.7742919922, 30.263298034668, 2);
         MoveObject(driftbase3, -2780.0437011719, -484.42724609375, 6.9515295028687, 2);
         MoveObject(driftbase4, -2785.1264648438, -480.34201049805, 6.871054649353, 2);
         MoveObject(driftbase5, -2790.4599609375, -476.39254760742, 6.871054649353, 2);
         MoveObject(driftbase6, -2795.0417480469, -473.04010009766, 6.871054649353, 2);
         MoveObject(driftbase7, -2788.6228027344, -496.20874023438, 6.8736667633057, 2);
         MoveObject(driftbase8, -2793.4953613281, -492.32580566406, 6.8715238571167, 2);
         MoveObject(driftbase9, -2798.8049316406, -488.67864990234, 6.871054649353, 2);
         MoveObject(driftbase10, -2804.0227050781, -485.09436035156, 6.871054649353, 2);
         MoveObject(driftbase11, -2809.1264648438, -325.58218383789, 6.714804649353, 2);
         MoveObject(driftbase12, -2815.4350585938, -324.06164550781, 6.7225999832153, 2),
         MoveObject(driftbase13, -2778.3413085938, -328.12686157227, 6.722617149353, 2);
      }
      else
      {
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
      }
      return 1;
   }
    if (strcmp("/driftbasedown", cmdtext, true, 4) == 0)
   {
      if (PlayerInfo[playerid][pAdmin] >= 1)
      {
         MoveObject(driftbase1, 1332.7237548828, -1400.4655761719, 0.017516136169, 2);
         MoveObject(driftbase2, 329.22326660156, -1632.7742919922, 0.263298034668, 2);
         MoveObject(driftbase3, -2780.0437011719, -484.42724609375, 0.9515295028687, 2);
         MoveObject(driftbase4, -2785.1264648438, -480.34201049805, 0.871054649353, 2);
         MoveObject(driftbase5, -2790.4599609375, -476.39254760742, 0.871054649353, 2);
         MoveObject(driftbase6, -2795.0417480469, -473.04010009766, 0.871054649353, 2);
         MoveObject(driftbase7, -2788.6228027344, -496.20874023438, 0.8736667633057, 2);
         MoveObject(driftbase8, -2793.4953613281, -492.32580566406, 0.8715238571167, 2);
         MoveObject(driftbase9, -2798.8049316406, -488.67864990234, 0.871054649353, 2);
         MoveObject(driftbase10, -2804.0227050781, -485.09436035156, 0.871054649353, 2);
         MoveObject(driftbase11, -2809.1264648438, -325.58218383789, 0.714804649353, 2);
         MoveObject(driftbase12, -2815.4350585938, -324.06164550781, 0.7225999832153, 2),
         MoveObject(driftbase13, -2778.3413085938, -328.12686157227, 0.722617149353, 2);
      }
      else
      {
           SendClientMessage(playerid,0xFF0019FF,"[ERROR]: Moras biti admin lvl 1+.");
      }
      return 1;
   }

Valjda ces sad skuzit na koju foru... :S
Poslednja Izmena: Jul 04, 2010, 16:18:35 POSLE PODNE od LuKsA
Aequam memento rebus in arduis servare mentem.

[LB]Weite.psd

*

#11
Jul 04, 2010, 17:25:59 POSLE PODNE
nevalja xD samoograde pocu se kretat -.-'' ma nis idem ponovo postavit ograde u mta pa cu pokusat jos 1

Chris

*

#12
Jul 04, 2010, 17:35:33 POSLE PODNE
Radi po onom tutorialu ja sam po njemu radio uvjek i radi sve...

[LB]Weite.psd

*

#13
Jul 04, 2010, 18:23:26 POSLE PODNE
po tutorijalu sam radio, evo opet sam napravio u mta i iso radit i nece -.-''  nezz fkt

[CH] ♫◄[Sam]►♫

*

#14
Jul 04, 2010, 18:59:01 POSLE PODNE
weite,prvo procitaj osnove PAWN jezika...
i onda pogledaj ovo malo:...
if (strcmp("/driftbaseup", cmdtext, true, 4) == 0) 
Štampaj
Idi gore Stranice1 2
Korisničke akcije