[Pomoc] Mapa

[ceLL_]

Znam kako da ubacim Mapu u GM i sve uradim kako treba!

Treba ovako:

Kod [Izaberi] Proširi

public OnGameModeInit()
{
CreateObject(ID objekta, x, y, z, Rx, Ry, Rz) //objekat neki

Ja tako uradim ali mi uvek bude neki error/warning!!

Molio bih vas da neko samo da ovde primer da ubaci bilo koju mapu i da posta ovde KOD!!! Molim vas,imam puno mapa za ubacivati!

[LuKsA]

Vjerojatno loose identitation warning.. znaci na pocetak moda

#pragma tabsize 0

Ili pa radi tocno 5 razmaka izmedu toga(TAB), znaci ovako

Kod [Izaberi] Proširi

public OnGameModeInit()
{
    CreateObject(ID objekta, x, y, z, Rx, Ry, Rz) //objekat neki

[ceLL_]

evo kako sam ubacio objekat:

Kod [Izaberi] Proširi

public OnGameModeInit()
{
     CreateObject(ID objekta, x, y, z, Rx, Ry, Rz) //CreateObject(14789, 1424.690308, -1004.066162, 1643.018677, 0.0000, 0.0000, 90.0000);
CreateObject(2774, 1433.026245, -1004.643921, 1635.819824, 0.0000, 0.0000, 0.0000);
CreateObject(2774, 1429.296997, -1004.618652, 1641.281128, 0.0000, 0.0000, 0.0000);
CreateObject(2774, 1440.957031, -979.682068, 1640.297729, 0.0000, 0.0000, 0.0000);
CreateObject(2774, 1429.337158, -979.545288, 1639.723389, 0.0000, 0.0000, 0.0000);
CreateObject(2774, 1449.314087, -984.505005, 1648.023193, 0.0000, 0.0000, 0.0000);
CreateObject(2774, 1413.914063, -984.515381, 1643.073486, 0.0000, 0.0000, 0.0000);
CreateObject(1886, 1448.510132, -1003.642944, 1647.093994, 19.7670, 0.0000, 223.3584);
CreateObject(1886, 1414.706543, -980.604431, 1647.061646, 19.7670, 0.0000, 43.3584);
CreateObject(2774, 1430.416870, -999.017273, 1638.722412, 0.0000, 269.7592, 0.0000);
CreateObject(2774, 1408.149292, -998.996826, 1638.722412, 0.0000, 269.7592, 180.0000);
CreateObject(2774, 1443.577271, -986.634644, 1638.723389, 0.0000, 269.7592, 270.0000);
CreateObject(2774, 1443.604492, -998.998169, 1647.797485, 0.0000, 0.0000, 0.0000);
CreateObject(11359, 1414.356201, -988.985352, 1639.795898, 0.0000, 0.0000, 90.0000);
CreateObject(2774, 1413.927368, -986.011719, 1643.046997, 0.0000, 0.0000, 270.0000);
CreateObject(2774, 1413.763672, -992.085388, 1643.673340, 0.0000, 0.0000, 0.0000);
CreateObject(626, 1427.554565, -997.322998, 1640.766479, 0.0000, 0.0000, 135.0000);
CreateObject(626, 1427.488281, -990.752502, 1640.841553, 0.0000, 0.0000, 135.0000);
CreateObject(2773, 1427.756714, -995.781189, 1639.310181, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1427.694946, -992.841431, 1639.310181, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1427.596924, -989.128601, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1429.863159, -982.927368, 1639.310181, 0.0000, 0.0000, 90.0000);
CreateObject(626, 1427.665283, -983.128601, 1640.841553, 0.0000, 0.0000, 236.2500);
CreateObject(2773, 1432.755859, -982.990784, 1639.310181, 0.0000, 0.0000, 90.0000);
CreateObject(626, 1434.648315, -983.188904, 1640.841553, 0.0000, 0.0000, 236.2500);
CreateObject(2773, 1437.091431, -983.054993, 1639.310181, 0.0000, 0.0000, 90.0000);
CreateObject(2773, 1440.040283, -983.012756, 1639.310181, 0.0000, 0.0000, 90.0000);
CreateObject(3462, 1448.466919, -993.014465, 1640.297974, 0.0000, 0.0000, 0.0000);
CreateObject(3462, 1448.512085, -982.992615, 1640.181519, 0.0000, 0.0000, 0.0000);
CreateObject(626, 1441.636230, -997.047729, 1640.741455, 0.0000, 0.0000, 146.2500);
CreateObject(14632, 1443.648682, -995.934631, 1638.667725, 0.0000, 0.0000, 90.0000);
CreateObject(14632, 1432.156372, -1018.015259, 1639.988159, 0.0000, 0.0000, 270.0000);
CreateObject(1514, 1432.294922, -998.852478, 1639.740112, 0.0000, 0.0000, 180.0000);
CreateObject(1514, 1438.352539, -998.846741, 1639.815674, 0.0000, 0.0000, 180.0000);
CreateObject(2773, 1435.183838, -996.759277, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1435.152466, -993.932556, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1439.338623, -996.658691, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1439.288940, -994.000671, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(1723, 1426.280151, -994.863586, 1638.707275, 0.0000, 0.0000, 270.0000);
CreateObject(1723, 1426.244629, -991.150452, 1638.732300, 0.0000, 0.0000, 270.0000);
CreateObject(1723, 1422.277466, -996.935059, 1638.682251, 0.0000, 0.0000, 90.0000);
CreateObject(1723, 1422.279297, -993.210022, 1638.657227, 0.0000, 0.0000, 90.0000);
CreateObject(2637, 1424.232422, -992.173584, 1638.838745, 0.0000, 0.0000, 270.0000);
CreateObject(2637, 1424.228516, -995.704163, 1638.838745, 0.0000, 0.0000, 270.0000);
CreateObject(3657, 1432.633301, -987.739014, 1639.202393, 0.0000, 0.0000, 0.0000);
CreateObject(3657, 1432.631104, -986.977234, 1639.202393, 0.0000, 0.0000, 180.0000);
CreateObject(3657, 1438.111572, -986.977539, 1639.202393, 0.0000, 0.0000, 180.0000);
CreateObject(3657, 1438.086304, -987.730713, 1639.227417, 0.0000, 0.0000, 0.0000);
CreateObject(2961, 1439.028320, -999.826660, 1639.211304, 0.0000, 0.0000, 0.0000);
CreateObject(2961, 1433.505615, -999.827637, 1639.301392, 0.0000, 0.0000, 0.0000);
CreateObject(2946, 1414.355225, -990.513489, 1638.755615, 0.0000, 0.0000, 0.0000);
CreateObject(2946, 1414.380249, -987.392517, 1638.755005, 0.0000, 0.0000, 180.0000);
CreateObject(2963, 1424.165283, -1004.815674, 1640.781128, 0.0000, 0.0000, 270.0000);
CreateObject(2963, 1426.806763, -1004.832520, 1640.826904, 0.0000, 0.0000, 90.0000);
CreateObject(1886, 1414.730591, -993.523010, 1646.908569, 17.1887, 0.0000, 67.5000);
CreateObject(2773, 1431.414551, -996.845825, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(2773, 1431.473389, -994.017090, 1639.301514, 0.0000, 0.0000, 0.0000);
CreateObject(632, 1434.735352, -987.757507, 1639.131226, 0.0000, 0.0000, 213.7500);
CreateObject(2942, 1417.713623, -980.475159, 1639.363525, 0.0000, 0.0000, 0.0000);
CreateObject(1216, 1443.281372, -989.311279, 1639.387817, 0.0000, 0.0000, 270.0000);
CreateObject(2942, 1421.217163, -980.448914, 1639.385498, 0.0000, 0.0000, 0.0000);
CreateObject(2942, 1424.630493, -980.526672, 1639.371460, 0.0000, 0.0000, 0.0000);
CreateObject(1216, 1443.277832, -991.424866, 1639.424194, 0.0000, 0.0000, 270.0000);
CreateObject(1216, 1443.251221, -987.278198, 1639.376221, 0.0000, 0.0000, 270.0000);
CreateObject(1216, 1443.259766, -985.484985, 1639.376221, 0.0000, 0.0000, 270.0000);
CreateObject(2773, 1441.228638, -993.042969, 1639.301514, 0.0000, 0.0000, 270.0000);
CreateObject(2824, 1424.297241, -992.054932, 1639.247681, 0.0000, 0.0000, 78.7500);

A evo 4errors:

Kod [Izaberi] Proširi

C:\Documents and Settings\Administrator\Desktop\ser 0.3\gamemodes\larp.pwn(19588) : error 017: undefined symbol "ID"
C:\Documents and Settings\Administrator\Desktop\ser 0.3\gamemodes\larp.pwn(19588) : error 017: undefined symbol "objekta"
C:\Documents and Settings\Administrator\Desktop\ser 0.3\gamemodes\larp.pwn(19588) : error 029: invalid expression, assumed zero
C:\Documents and Settings\Administrator\Desktop\ser 0.3\gamemodes\larp.pwn(19588) : fatal error 107: too many error messages on one line

Compilation aborted.Pawn compiler 3.2.3664 Copyright (c) 1997-2006, ITB CompuPhase


PS: Nisam ubacio na pocetak moda #pragma tabsize..... Prvo sam probao ovako da uvucem 5 razmaka!! POMAGAJ

4 Errors.

[LuKsA]

Joj, idi citaj osnove pawnoa, pa oprosti ali sta je s tobom, ono je samo bio primjer, i + k tome tvoj primjer, i takoder ako je jedno udaljeno 5 razmaka, onda nek sve bude, selektiraj sve to i pritisni tab..

Obrisi ovaj prvi createobject :S

[ceLL_]

Too Caree!!!  Hvala ti puno....

Moze LOCK


EDIT: A kada ocu drugu mapu da ubacim koliko da odmaknem od ove prve 1 red??

I posto imam 0.3b cuo sam da treba nesto da se dodaje na kraju ! Sta to?