[Pomoc]Neotvara vrata

[Rbr97]

Skripta koju koristim:Moj gm od 0
Detaljan opis problema:
Pa dodem do vrata kucam /open i nece da otvori
Dio skripte:

new kapija1; //PD Garaža

    kapija1 = CreateObject(971,1588.900,-1638.300,15.000,0,0,0); //object(subwaygate) (1)

CMD:open(playerid, params[])
{
	if(IsPlayerConnected(playerid))
 	{
 	    if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 0);
     	SetTimer("UnKapija1", 5000, 0);
	}
	return 1;
}

forward UnKapija1(playerid);
public UnKapija1(playerid)
{
	MoveObject(kapija1,1588.900,-1638.300,15.000, 0);
	return 1;
}

Neke slike/video za lakse dobivanje pomoci(neobavezno):

[AjdiNNN]

CMD:open(playerid, params[])
{
	if(IsPlayerConnected(playerid))
 	{
 	    if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);// nisi stavio brzinu xD
     	SetTimer("UnKapija1", 5000, 0);
	}
	return 1;
}

[Rbr97]

Tako radi ali pokušao sam ovako ali sam premjestio ovako i neradi

if( newkeys == KEY_CROUCH)//Kapija 1 - PD Garaža
{
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
		{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);
     	SetTimer("UnKapija1", 5000, 0);
		}
	}

Dali je KEY_CROUCH Sirena?

[CamPeR1232]

jeste sirena je ali ti nisi dodo return 1; za funkiju IsPlayerInRangeOf

if( newkeys == KEY_CROUCH)//Kapija 1 - PD Garaža
{
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
	{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);
     		SetTimer("UnKapija1", 5000, 0);
	}
	return 1;
}

[Rbr97]

Neradi

[CamPeR1232]

JA tek sad shvatio sta je

if( newkeys == KEY_CROUCH)//Kapija 1 - PD Garaža
{
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
	{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
		{
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);
     		SetTimer("UnKapija1", 5000, 0);
		}
	}
	return 1;
}

[Rbr97]

OPet neradi

[CamPeR1232]

http://wiki.sa-mp.com/wiki/MoveObject

[Rbr97]

Nista nedami se zamarat,bar mi reci onda kako da napraivm komandu u komandi?
esto ovako

CMD:op(playerid, params[])
{
	if(IsPlayerConnected(playerid))
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
	{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);
  		SetTimer("UnKapija1", 5000, 0);
	}
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
		{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija2, 1544.699,-1630.699,13.100, 3.0);
     	SetTimer("UnKapija2", 5000, 0);
		}
	}
	return 1;
}

[CamPeR1232]

CMD:op(playerid, params[])
{
	if(IsPlayerConnected(playerid))
	if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
	{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija1, 1597.100,-1638.300,15.000, 3.0);
  		SetTimer("UnKapija1", 5000, 0);
	}
	else if(IsPlayerInRangeOfPoint(playerid, 2.0,  1597.100,-1638.300,15.000 ))
		{
  		if(PlayerInfo[playerid][pMember] == 1 || PlayerInfo[playerid][pLider] == 1)
  		MoveObject(kapija2, 1544.699,-1630.699,13.100, 3.0);
     	SetTimer("UnKapija2", 5000, 0);
		}
       return 1;
	}

[@Mirzerian_06]

new kapijablabla = CreateDynamicObject(parametri.)
MoveDynamicObject(kapijablabla,paramteri)
i u forward MoveDynamicObject(kapijablabla,pocetne koor).

[AjdiNNN]

Javi se PM da ti lijepo ostavim kontakt pa da ti objasnim sve