[MAP]AutoSalon

Započeo Scorly, Februar 11, 2012, 17:35:24 POSLE PODNE

prethodna tema - sledeća tema

0 članova i 2 gostiju pregledaju ovu temu.

Štampaj
Idi dole Stranice1
Korisničke akcije

Scorly

*

Februar 11, 2012, 17:35:24 POSLE PODNE
Napravio:Scorly
Vreme Izrade:60 min
Opis: Ovo je moj prvi MTA project i potrudio sam se maximalno da ga sto preciznije napravim
Slike:











Kod [Izaberi]
CreateObject(9131, 1432.3000488281, -1021.4000244141, 24.10000038147, 0, 0, 0);
CreateObject(9131, 1432.3000488281, -1021.4000244141, 26.299999237061, 0, 0, 0);
CreateObject(9131, 1432.3000488281, -1021.4000244141, 28, 0, 0, 0);
CreateObject(9131, 1432.3000488281, -1021.4000244141, 30.200000762939, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1021.299987793, 24.10000038147, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1021.299987793, 26.299999237061, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1020.700012207, 24.39999961853, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1020.700012207, 26.700000762939, 0, 0, 0);
CreateObject(3851, 1433.8000488281, -1021.5, 24.89999961853, 0, 0, 90);
CreateObject(3851, 1445.0999755859, -1021.5, 24.89999961853, 0, 0, 90);
CreateObject(3851, 1433.8000488281, -1021.5, 28.85000038147, 0, 0, 90);
CreateObject(3851, 1445.0999755859, -1021.5, 28.89999961853, 0, 0, 90);
CreateObject(9131, 1450.5999755859, -1021.299987793, 28, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1020.5999755859, 29, 0, 0, 0);
CreateObject(9131, 1450.5999755859, -1021.299987793, 30.200000762939, 0, 0, 0);
CreateObject(736, 1535.1999511719, -1033.3000488281, 34.099998474121, 0, 0, 0);
CreateObject(736, 1592.5, -1146.6999511719, 34.400001525879, 0, 0, 0);
CreateObject(9131, 1473.5, -1021.299987793, 24.10000038147, 0, 0, 0);
CreateObject(9131, 1473.5, -1021.299987793, 26.299999237061, 0, 0, 0);
CreateObject(9131, 1473.5, -1020.5999755859, 24.39999961853, 0, 0, 0);
CreateObject(9131, 1473.5, -1020.5999755859, 26.700000762939, 0, 0, 0);
CreateObject(9131, 1473.5, -1020.5999755859, 28, 0, 0, 0);
CreateObject(9131, 1473.5, -1021.299987793, 28, 0, 0, 0);
CreateObject(9131, 1473.5, -1020.5999755859, 30.290000915527, 0, 0, 0);
CreateObject(9131, 1473.5, -1021.299987793, 30.200000762939, 0, 0, 0);
CreateObject(9131, 1451, -1020.700012207, 31.200000762939, 0, 0, 0);
CreateObject(9131, 1491.5999755859, -1021.299987793, 24.10000038147, 0, 0, 0);
CreateObject(9131, 1491.5999755859, -1021.299987793, 26.299999237061, 0, 0, 0);
CreateObject(9131, 1491.5999755859, -1021.299987793, 28, 0, 0, 0);
CreateObject(9131, 1491.5999755859, -1021.299987793, 30, 0, 0, 0);
CreateObject(3851, 1490.8000488281, -1021.299987793, 25, 0, 0, 90);
CreateObject(3851, 1479.5, -1021.299987793, 25, 0, 0, 90);
CreateObject(3851, 1479.5, -1021.299987793, 29, 0, 0, 90);
CreateObject(3851, 1490.8000488281, -1021.299987793, 29, 0, 0, 90);
CreateObject(792, 1387.8000488281, -1021.700012207, 25, 0, 0, 0);
CreateObject(1280, 1449.5, -1022, 23.200000762939, 0, 0, 93);
CreateObject(1280, 1441.3000488281, -1021.9000244141, 23.200000762939, 0, 0, 92.999267578125);
CreateObject(1280, 1474.8000488281, -1022.0999755859, 23.200000762939, 0, 0, 92.999267578125);
CreateObject(1280, 1482.1999511719, -1022, 23.200000762939, 0, 0, 92.999267578125);
CreateObject(994, 1473.0999755859, -1023.799987793, 22.999992370605, 0, 0, 0);
CreateObject(994, 1484.1999511719, -1023.700012207, 22.799999237061, 0, 0, 0);
CreateObject(994, 1444.8000488281, -1023.799987793, 22.799999237061, 0, 0, 0);
CreateObject(994, 1434.0999755859, -1023.700012207, 22.799999237061, 0, 0, 0);
CreateObject(1251, 1470.8000488281, -1032.5, 22.610000610352, 0, 30, 0);
CreateObject(1251, 1470.8000488281, -1035.4000244141, 22.60000038147, 0, 29.998168945313, 0);
CreateObject(1251, 1418.4000244141, -1032.5999755859, 22.60000038147, 0, 29.998168945313, 0);
CreateObject(1251, 1418.4000244141, -1035.6999511719, 22.60000038147, 0, 29.998168945313, 0);
CreateObject(3851, 978, -1304.5999755859, 14.60000038147, 0, 0, 0);
CreateObject(9131, 978.29998779297, -1295.9000244141, 13.699999809265, 0, 0, 0);
CreateObject(9131, 978.29998779297, -1295.9000244141, 15.89999961853, 0, 0, 0);
CreateObject(9131, 978.29998779297, -1298.9000244141, 13.5, 0, 0, 0);
CreateObject(9131, 978.29998779297, -1298.9000244141, 15.699999809265, 0, 0, 0);
CreateObject(1491, 978.20001220703, -1298.5, 12.39999961853, 0, 0, 88);
CreateObject(9131, 978.29998779297, -1296.5999755859, 13.699999809265, 0, 0, 0);
CreateObject(9131, 978.29998779297, -1296.5999755859, 15.89999961853, 0, 0, 0);
CreateObject(3051, 978.09997558594, -1297.8000488281, 15.300000190735, 90, 0, 0);
CreateObject(9131, 978.29998779297, -1298, 16, 90, 0, 0);
CreateObject(9131, 978.29998779297, -1297.9000244141, 16.60000038147, 90, 0, 0);
CreateObject(3851, 983.70001220703, -1310.3000488281, 15, 0, 0, 90);
CreateObject(9131, 978.20001220703, -1310.3000488281, 13.5, 0, 0, 0);
CreateObject(9131, 978.20001220703, -1310.3000488281, 15.699999809265, 0, 0, 0);
CreateObject(3851, 995, -1310.3000488281, 15, 0, 0, 90);
CreateObject(3851, 1006.2998046875, -1310.2998046875, 15, 0, 0, 90);
CreateObject(9131, 1011.9000244141, -1310.4000244141, 13.699999809265, 0, 0, 0);
CreateObject(9131, 1011.9000244141, -1310.4000244141, 15.800000190735, 0, 0, 0);
CreateObject(9131, 1015.5999755859, -1310.4000244141, 13.699999809265, 0, 0, 0);
CreateObject(9131, 1015.5999755859, -1310.4000244141, 15.800000190735, 0, 0, 0);
CreateObject(1491, 1013.799987793, -1310.5999755859, 12.5, 0, 0, 0);
CreateObject(1491, 1012.299987793, -1310.5999755859, 12.5, 0, 0, 0);
CreateObject(9131, 1014.9000244141, -1310.5, 17.39999961853, 0, 90, 0);
CreateObject(9131, 1012.69921875, -1310.5, 17.39999961853, 0, 90, 0);
CreateObject(1649, 1013.9000244141, -1310.5, 16.60000038147, 0, 0, 0);
CreateObject(3851, 980, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 984, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 988, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 992, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 995.95001220703, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1000, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1004, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1008, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1011, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1014.799987793, -1304.5999755859, 16.60000038147, 0, 90, 0);
CreateObject(3851, 1011, -1298, 16.550001144409, 0, 90, 90);
CreateObject(3851, 999.70001220703, -1297.6999511719, 16.549999237061, 0, 90, 90);
CreateObject(3851, 988.5, -1297.6999511719, 16.60000038147, 0, 90, 90);
CreateObject(3851, 980.89001464844, -1299, 16.60000038147, 0, 90, 0);
CreateObject(2773, 979.70001220703, -1307.6999511719, 12.89999961853, 0, 0, 93);
CreateObject(2773, 980.90002441406, -1308.8000488281, 12.89999961853, 0, 0, 0);
CreateObject(2773, 982.20001220703, -1307.8000488281, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 983.09997558594, -1308.9000244141, 12.89999961853, 0, 0, 0);
CreateObject(2773, 984.40002441406, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 985.29998779297, -1308.8000488281, 12.89999961853, 0, 0, 0);
CreateObject(2773, 986.40002441406, -1307.8000488281, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 987.40002441406, -1308.8000488281, 12.89999961853, 0, 0, 0);
CreateObject(2773, 988.59997558594, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 989.59997558594, -1308.6999511719, 12.89999961853, 0, 0, 0);
CreateObject(2773, 990.79998779297, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 991.70001220703, -1308.5999755859, 12.89999961853, 0, 0, 0);
CreateObject(2773, 992.90002441406, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 993.79998779297, -1308.6999511719, 12.89999961853, 0, 0, 0);
CreateObject(2773, 994.90002441406, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 995.79998779297, -1308.8000488281, 12.89999961853, 0, 0, 0);
CreateObject(2773, 997, -1307.6999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 998, -1308.5999755859, 12.89999961853, 0, 0, 0);
CreateObject(2773, 999.20001220703, -1307.5, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 1000.0999755859, -1308.5999755859, 12.89999961853, 0, 0, 0);
CreateObject(2773, 1001.200012207, -1307.5, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 1002.0999755859, -1308.5999755859, 12.89999961853, 0, 0, 0);
CreateObject(2773, 1003.5, -1307.4000244141, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 990.90002441406, -1299.3000488281, 12.89999961853, 0, 0, 0);
CreateObject(2773, 995.59997558594, -1303.3000488281, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 1004.5999755859, -1308.6999511719, 12.89999961853, 0, 0, 0);
CreateObject(3851, 1010.0999755859, -1297.5999755859, 14.39999961853, 0, 0, 90);
CreateObject(3851, 998.79998779297, -1297.5999755859, 14.39999961853, 0, 0, 90);
CreateObject(3851, 987.5, -1297.5999755859, 14.39999961853, 0, 0, 90);
CreateObject(3851, 981.90002441406, -1292, 14.39999961853, 0, 0, 0);
CreateObject(2572, 986.79998779297, -1299.3000488281, 12.39999961853, 0, 0, 0);
CreateObject(2176, 1008.5, -1309.2998046875, 15.199999809265, 0, 0, 0);
CreateObject(2118, 984.29998779297, -1299.8000488281, 12.39999961853, 0, 0, 0);
CreateObject(1753, 983.70001220703, -1298.5999755859, 12.39999961853, 0, 0, 0);
CreateObject(1742, 982.40002441406, -1297.5999755859, 12.39999961853, 0, 0, 0);
CreateObject(2533, 981.40002441406, -1295.6999511719, 12.5, 0, 0, 0);
CreateObject(2533, 1015.0999755859, -1297.9000244141, 12.5, 0, 0, 0);
CreateObject(1616, 1015.200012207, -1310.3000488281, 16.299999237061, 0, 0, 0);
CreateObject(1627, 978.5, -1309.9000244141, 15.699999809265, 0, 0, 0);
CreateObject(1622, 1015.700012207, -1298.1999511719, 16.200000762939, 0, 0, 0);
CreateObject(2714, 1013.9000244141, -1310.9000244141, 17.39999961853, 0, 0, 0);
CreateObject(8322, 1004.5999755859, -1295.1999511719, 28.39999961853, 0, 0, 0);
CreateObject(2933, 1716.1999511719, 1303.4000244141, 14.60000038147, 0, 0, 93);
CreateObject(988, 1716.6999511719, 1294.9000244141, 10.880000114441, 0, 0, 93);
CreateObject(988, 1716.4000244141, 1300.3000488281, 10.880000114441, 0, 0, 92.999267578125);
CreateObject(988, 1716, 1307, 10.880000114441, 0, 0, 92.999267578125);
CreateObject(988, 1715.9000244141, 1309.5999755859, 10.89999961853, 0, 0, 92.999267578125);
CreateObject(2933, 1716.5, 1298.0999755859, 16.700000762939, 0, 0, 92.999267578125);
CreateObject(2933, 1716, 1307.4000244141, 16.799999237061, 0, 0, 92.999267578125);
CreateObject(3801, 1452, -1021.200012207, 31, 0, 0, 0);
CreateObject(3471, 1451.5, -1020.700012207, 24.700000762939, 0, 0, 270);
CreateObject(3471, 1472.5, -1020.799987793, 24.700000762939, 0, 0, 270);
CreateObject(7392, 1906.6999511719, -1354, 38.200000762939, 0, 0, 93);
CreateObject(7392, 1837.3000488281, -1684.1999511719, 27.60000038147, 0, 0, 0);
CreateObject(1676, 998.79998779297, -937.79998779297, 42.900001525879, 0, 0, 10);
CreateObject(1676, 1001.5999755859, -937.29998779297, 42.900001525879, 0, 0, 9.99755859375);
CreateObject(1676, 1005.5, -936.79998779297, 42.900001525879, 0, 0, 9.99755859375);
CreateObject(1676, 1008.799987793, -936.29998779297, 42.900001525879, 0, 0, 9.99755859375);
CreateObject(6976, 1010.799987793, -1020.299987793, 31.10000038147, 0, 0, 88);
CreateObject(2176, 1010.5999755859, -1309.1999511719, 15.199999809265, 0, 0, 0);
CreateObject(17068, 723.79998779297, -1506.9000244141, 0.60000002384186, 0, 0, 0);
CreateObject(17068, 722, -1507, 0.60000002384186, 0, 0, 0);
CreateObject(2773, 991.20001220703, -1302.4000244141, 12.89999961853, 0, 0, 0);
CreateObject(2773, 992.79998779297, -1303.4000244141, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 998.29998779297, -1303.1999511719, 12.89999961853, 0, 0, 92.999267578125);
CreateObject(2773, 999.40002441406, -1301.5999755859, 12.89999961853, 0, 0, 0);
CreateObject(2773, 999.5, -1299.0999755859, 12.89999961853, 0, 0, 0);

Ako bude kakvi greski i nesto ovo mi je prvi MTA projekt....Nadam se da vam se svidja

EDIT:Stavio u code nisam znao
Poslednja Izmena: Februar 11, 2012, 18:00:13 POSLE PODNE od Scorly

Mark_ElitaLorenci

*

#1
Februar 11, 2012, 17:44:56 POSLE PODNE
stavi objekte u code.

Mark_ElitaLorenci

*

#3
Februar 11, 2012, 17:53:38 POSLE PODNE
Citat: Scorly poslato Februar 11, 2012, 17:48:17 POSLE PODNE
Citat: Mark_ElitaLorenci poslato Februar 11, 2012, 17:44:56 POSLE PODNE
stavi objekte u code.

mozes mi pomoci novi sam pa nezz

[.code][./code]

Ovako stavi.
Tacke izbrisi!

[.code] - stavis na pocetak
[./code] - stavis na kraj
Poslednja Izmena: Februar 11, 2012, 17:54:45 POSLE PODNE od Mark_ElitaLorenci

CodyV

*

#4
Februar 11, 2012, 18:26:03 POSLE PODNE
8/10
Jerry_Mortinson || River Side Member ||

Scorly

*

#5
Februar 11, 2012, 20:02:29 POSLE PODNE
Citat: Elvis_Hadjic poslato Februar 11, 2012, 19:59:42 POSLE PODNE
omg nisi ti ovo dobro uradio znas li ti brisat objekte a ne ih stavljati u zrak  ja stavio ovo i dodje do tam kad odjednom pocese objekti sa zraka padati xD

Kod mene je sve ok kada sam probava sa mta

Otisao s Foruma!

*

#6
Februar 11, 2012, 20:03:34 POSLE PODNE
Fino za pocetak 10/10  ;)
[[/center]
DgL <3
Otisao s Foruma zz

Vegas.

#7
Februar 11, 2012, 20:13:32 POSLE PODNE
Sve je to brate fino, ali Ä'e krov ? BTW 8/10

Scorly

*

#8
Februar 11, 2012, 20:27:15 POSLE PODNE
Citat: Vegas. poslato Februar 11, 2012, 20:13:32 POSLE PODNE
Sve je to brate fino, ali Ä'e krov ? BTW 8/10

krov nisam stigao brate i nisam znao sto da stavim msm nisam nasao sta da stavljam kao krov

Hvala svima zadovoljan sam ocjenama u 1 MTA projektu ako neko zna kako da stavim ova auta na buy

Emina_Bentley

*

#9
Februar 11, 2012, 20:37:27 POSLE PODNE
Solidno je ... 6/10

McAfee

*

#10
Februar 11, 2012, 22:53:20 POSLE PODNE
Iskreno meni se svidja mada samo ovi staklici da su malo bolje namesteni...
8/10
~~~ProSolution Roleplay Samp Server
ProSolution RolePlay Nas ip je: 193.192.59.107:7783
~~~ProSolution TeamSpeak 3~~~
iNfamous Team Speak 3 Server...  64.31.59.188:9999

~~~ProSolution Roleplay Forum
ProSolution RolePlay Nas forum je:

Bezimeni

*

#11
Februar 12, 2012, 10:28:51 PRE PODNE
nije nesto moze se to puno bolje 4/10
Štampaj
Idi gore Stranice1
Korisničke akcije