[pomoc]objekti kako

Započeo ScaRy, Februar 06, 2011, 18:00:42 POSLE PODNE

prethodna tema - sledeća tema

0 članova i 1 gost pregledaju ovu temu.

Štampaj
Idi dole Stranice1
Korisničke akcije

ScaRy

*

Februar 06, 2011, 18:00:42 POSLE PODNE
//OBJEKTI KOJI SE POMJERAJU
survivorkapija = CreateObject(8229, -2152.2182617188, 3137.8479003906, 5.1646228790283, 0, 0, 0);//survivor
zid1 = CreateObject(2963,1479.4013671875,-1688.6501464844,12,180,0,270)
zid2 = CreateObject(2963,1477.2703857422,-1686.5227050781,12,180,0,180)
zid3 = CreateObject(2963,1481.5152587891,-1686.482421875,12,180,0,0)
zid4 = CreateObject(2963,1479.4110107422,-1684.3792724609,12,180,0,90)
hell = CreateObject(3852, -2931.3127441406, 450.48751831055, 2.3407988548279, 0.000000, 0.000000, 89.684936523438)
hell1 = CreateObject(3852, -2931.3447265625, 446.92239379883, 2.3407988548279, 0.000000, 0.000000, 89.681396484375)
pdgate1 = CreateObject(971,1589.053344,-1638.123168,14.122960,0.000000,0.000000,180);
pdgate2 = CreateObject(968,1544.700317,-1630.735717,13.096980,-1.000000,-91.000000,269.972869);
tugate = CreateObject(971, 1049.2530,-1026.0344,31.1016,0, 0.0000, 0.0000);
lspddoor1 = CreateObject(1500, 245.0578,72.4314,1002.5406,0, 0.0000, 0.0000);
lspddoor2 = CreateObject(1500, 245.9478,72.4314,1002.5406,0, 0.0000, 0.0000);
armygate1 = CreateObject(969, 2720.3772,-2409.7523,12.6,0, 0.0000, 90);
armygate2 = CreateObject(969, 2720.3772,-2508.3069,12.6,0, 0.0000, 90);
fbigate = CreateObject(980, 1534.9020,-1451.5979,14.4882,0, 0.0000, 0);
hspdgate = CreateObject(971, 1643.3379,-1714.9338,15.3067,0, 0.0000, 90);
taxigate = CreateObject(968, 1273.2890625, -1843.2409667969, 13.140628814697, 0.000000, 270, 0.000000); //taxi kapija
lcngate = CreateObject(980, 1284.6973876958, -2056.69921875, 60.158, 0, 0, 90); //lcn kapija
yakuzagate = CreateObject(980,1245.3275146484,-767.20440673828,93.842063903809,0,0,0);
crossgate = CreateObject(991,-2397.919921875,-2192.8891601563,32.429298400879,0,0,0) //zatvoreno
hitmangate = CreateObject(980,1023.7610473633,-369.64624023438,75.441772460938,0,0,356.03002929688)//hitman kapija
crossgate1 = CreateObject(994,-2376.8503417969,-2193.1882324219,32.291904449463,0,0,295.50512695313)//cross start kapija
racegate = CreateObject(994,-1301.2603759766,-605.86346435547,13.1484375,0,0,90)//race start kapija lijeva
racegate1 = CreateObject(994,-1301.2080078125,-598.81323242188,13.1484375,0,0,90)//race start kapija desna
         tracegate = CreateObject(982, 691.125, -3487.7810058594, 14.359846115112, 0, 0, 90)//race start kapija lijeva
         tracegate1 = CreateObject(982, 716.71813964844, -3487.7822265625, 14.359846115112, 0, 0, 90)//race start kapija desna
racegate2 = CreateObject(991,-1266.6687011719,-566.58264160156,13.313694000244,0,0,0)//zatvorena
swatdoor = CreateObject(3062,2748.0122070313,-2451.9243164063,14.059488105774,0,0,0)
hell2 = CreateObject(980,-2937.3056640625,415.85479736328,1.9369312524796,0,0,14.890380859375)
hell3 = CreateObject(980,-2951.8977050781,411.66275024414,1.9369312524796,0,0,16.8798828125)
sfpdgate = CreateObject(980,-1636.5587158203,688.26141357422,8.9608917236328,0,0,180) //lijeva zatvorena
sfpdgate1 = CreateObject(980,-1625.0284423828,688.26141357422,8.9608917236328,0,0,0)//desna zatvorena
sfpdrampa = CreateObject(968,-1572.2039794922,658.83715820313,6.8781242370605,0,90,90)//sfpd rampa
rusgate = CreateObject(980,-2127.4079589844,-80.801971435547,37.093704223633,0,0,0)
sfpdrampa2 = CreateObject(968,-1701.4404296875,687.60888671875,24.632816314697,0,270,90)
ruslift = CreateObject(3095,-2113.7294921875,-197.96894836426,34.545051574707,0,180,0)
hitnapod = CreateObject(7922, 1174.3117675781, -1366.3216552734, 12.150856018066, 90, 0, 90);
hitnaograda = CreateObject(997, 1172.4727783203, -1365.2312011719, 13.227673530579, 0, 0, 0);
platforma1 = CreateObject(11326, -865.50744628906, 3604.4118652344, -1.4559230804443, 0.000000, 0.000000, 315);
platforma2 = CreateObject(11326, -794.91754150391, 3591.0688476563, -1.4559230804443, 0.000000, 0.000000, 45);
platforma3 = CreateObject(11326, -781.95355224609, 3661.9816894531, -1.4559230804443, 0.000000, 0.000000, 135);
platforma4 = CreateObject(11326, -852.41290283203, 3674.810546875, -1.4559230804443, 0.000000, 0.000000, 225);
//---------OSTALI OBJEKTI-------------------
CreateObject(980, 2625.6016,-2347.2651,13.6328,0, 0.0000, 90);
CreateObject(980, 2625.6016,-2336.8651,13.6328,0, 0.0000, 90);
CreateObject(971, 1643.2224,-1696.4561,15.4013,0, 0.0000, 90);
CreateObject(2008,256.912719,86.266647,1001.380432,0.000000,0.000000,89.637771);
CreateObject(2008,256.895721,84.360313,1001.387145,0.000000,0.000000,90.264396);
CreateObject(1708,258.067474,87.681488,1001.343872,0.000000,0.000000,270.072540);
CreateObject(1708,258.011108,85.874336,1001.301879,0.000000,0.000000,268.482452);
CreateObject(1500,1582.6205,-1638.0587,12.3776,0.000000,-1.000000,0);
CreateObject(1500,2278.8599,-1140.4896,1049.7884,0,0,90); //Toilet Door
CreateObject(14819,2278.5599,-1138.8896,1050.9984,0,0,90); //Toilet Door
CreateObject(3968,-1827.924560,5.411730,1061.143554,0.000000,0.000000,179.354736); //INSIDE SFPD 5
CreateObject(7927,354.0655,168.7928,1019.9844,0.000000,0.000000,90);//Hospital gate
CreateObject(7927,1240.6016,-833.6031,1084.2678,0.000000,0.000000,0);//Surrenos HQ
CreateObject(7927,1280.4507,-789.1681,1084.2578,0.000000,0.000000,0);//Madd dog crib
CreateObject(7927,1251.8077,-789.1934,1084.2578,0.000000,0.000000,180);//Madd dog crib
CreateObject(7927,366.4987,189.7234,1008.6103,-0.00000,0.000000,90); // ABC Studio
CreateObject(7927,371.6472,179.1361,1014.4075,-0.00000,0.000000,270); // LA Yellow Cab Co.
CreateObject(994,1544.4385,-1617.5925,12.5046,-0.00000,0.000000,270);
CreateObject(994,1544.4385,-1632.7525,12.5046,-0.00000,0.000000,270);
CreateObject(1798,346.7344,165.5153,1013.1875,0.000000,0.000000,270); // Bed
CreateObject(1798,346.7344,163.0153,1013.1875,0.000000,0.000000,270); // Bed
CreateObject(1798,346.7344,160.5153,1013.1875,0.000000,0.000000,270); // Bed
CreateObject(7927,345.7073,157.3066,1014.4075,-0.00000,0.000000,90); // Wound hospital
CreateObject(971,-1935.9930,239.1291,34.3210,-0.00000,0.000000,0);
CreateObject(971,2386.6780,1043.5566,10.8203,-0.00000,0.000000,0);
CreateObject(971,1843.2667,-1854.5895,12.0828,-0.00000,0.000000,270);
CreateObject(971,1025.2795,-1029.2299,32.1016,-0.00000,0.000000,0); // Pay & Spray
CreateObject(971,488.2341,-1735.4591,11.1416,-0.00000,0.000000,174); // Pay & Spray
CreateObject(971,2071.5410,-1831.4143,13.5469,-0.00000,0.000000,90); // Pay & Spray
CreateObject(971,719.8199,-462.4768,16.3359,-0.00000,0.000000,0); // Pay & Spray
CreateObject(971,-1904.4561,277.8578,41.0469,-0.00000,0.000000,0); // Pay & Spray
CreateObject(1676,1007.3336,-936.4127,42.7581,-0.00000,0.000000,5); // Gas tank in Vinewood
CreateObject(1676,1000.6406,-937.1027,42.7581,-0.00000,0.000000,5); // Gas tank in Vinewood

nije mi jasno kako sad da ix promenim u createstreamobject ako neko moze isto ovako samo sa createstreamobject...

poznaticovik

#1
Februar 06, 2011, 18:02:37 POSLE PODNE
Nisam siguran dali možeÅ¡ samo dodati Streamer izmeÄ'u Create i Object mislim da moraÅ¡ konvertirat

K4[Я]!K3

*

#2
Februar 06, 2011, 18:03:43 POSLE PODNE
Citat: Matt' poslato Februar 06, 2011, 18:02:37 POSLE PODNE
Nisam siguran dali možeÅ¡ samo dodati Streamer izmeÄ'u Create i Object mislim da moraÅ¡ konvertirat

ŁoŁ

moze.. samo upises koji ti treba :D (Dynamic,Stream..........)

[]Flynâ„¢

*

#3
Februar 06, 2011, 18:05:02 POSLE PODNE
CTRL+H

Gore upises:

CreateObject

Dole upises:

CreateStreamObject

ScaRy

*

#4
Februar 06, 2011, 18:05:51 POSLE PODNE
znam da treba ali kako pise za createstreamobject?? ako je moguce?

K4[Я]!K3

*

#5
Februar 06, 2011, 18:08:24 POSLE PODNE
Citat: ScaRy poslato Februar 06, 2011, 18:05:51 POSLE PODNE
znam da treba ali kako pise za createstreamobject?? ako je moguce?

Pa ako imas mapu convertas u koji ti treba...ako nemas rucno upisuj ili CTRL + H :D
EDIT: koji object streamer koristis?
Poslednja Izmena: Februar 06, 2011, 18:09:51 POSLE PODNE od [RPF] K4r!k3 ≡ Ö

ScaRy

*

#6
Februar 06, 2011, 18:42:51 POSLE PODNE
koristim midostream a koji treba??? i kad prebacim u createstreamobject opet greske ..

K4[Я]!K3

*

#7
Februar 06, 2011, 19:14:23 POSLE PODNE
Citat: ScaRy poslato Februar 06, 2011, 18:42:51 POSLE PODNE
koristim midostream a koji treba??? i kad prebacim u createstreamobject opet greske ..

#include <MidoStream>  ??

poznaticovik

#8
Februar 06, 2011, 19:19:26 POSLE PODNE
Mozda nije ubacio baš include ili nešto :)

ScaRy

*

#9
Februar 06, 2011, 19:22:57 POSLE PODNE
ima u modu #include <MidoStream> i pise greska da nemoze da ga ucita...

[RTVTDM] Waka-Waka.exe

*

#10
Februar 06, 2011, 19:28:21 POSLE PODNE
Citat: ScaRy poslato Februar 06, 2011, 19:22:57 POSLE PODNE
ima u modu #include <MidoStream> i pise greska da nemoze da ga ucita...
Jel imas include u includes?
I ako koristis win onda moras imat file za win, a ako koristis linux onda moras imat file za linux
For ya...

I'd catch a grenade for ya
Throw my hand on a blade for ya
I'd jump in front of a train for ya
You know I'd do anything for ya

BestOne.exe | Mapper | n00b Skripter | Bruno Mars Fan | Balkan SA:MP <3 | Fifa 11 <3

For ya...

ScaRy

*

#11
Februar 06, 2011, 19:29:43 POSLE PODNE
windows je ali nemam mozes mi dati link da skinem?
Štampaj
Idi gore Stranice1
Korisničke akcije